Talk iPhone - iPhone Forum

jdej663390 · 07-10-2007, 12:48 AM

That sounds like one of the services got stopped or disconnected.

Make sure your RPC over HTTP services are running.

Also restart exchange (not the server just the exchange services)

restart IIS

Go to your system Manager and check the first group store and make sure that all the protocols are running except the nntp one.

I think this will resolve your problem.

iAm · 07-10-2007, 11:31 AM

If anyone is still struggling with this iceweb have added iphone support for their MS Exchange subscription service. It costs $8.50 put might be of use to some

http://www.icemail.com/

cporto · 09-21-2007, 02:40 AM

Hello Fellas:

I have some success utilizing the Exchange feature, but it is limited to within the private network (Office WiFi and works great). At my home (another WiFi, but different private subnet) I cannot get updates, which leads me to believe that the port, although supposedly opened at my office Netgear FVS124G, is being blocked.

Do you guys have any other suggestions? I haven't had the opportunity to test a third WiFi, and the one I am at now is a companion Netgear (FVS114) with a VPN tunnel running. Can the Exchange server talk to a different private IP? I thought it shouldn't matter with a Secure Cert. and a successful connection. (Although a secure cert. shouldn't be necessary)

Thank you.

cporto

Seattle10 · 11-12-2007, 07:12 PM

Still having trouble getting the iphone setup correctly with exchange. We are running exchange 2003 and OWA. I got IMAP and owa enabled, and RPC over http enable but have no luck. I always get the "Cannot Connect Using SSL",Do you want to try setting up the account without SSL"
Should I be setting this up using SSL and if so, what changes do i need to make? If I click "YES" it tries to verify but always get " username or password in incorrect. Any help would be much appreciated. Thanks.

iAm · 11-12-2007, 07:34 PM

Here's a really great walkthrough guide that will help you out:

http://blog.monkeykit.com/2007/08/31...h-your-iphone/

It goes into a lot of detail so hopefully that'll fix it for you.

Seattle10 · 11-29-2007, 04:09 PM

I finally got my email setup on iphone through exchange server and am receive and view emails but am having trouble sending emails. I can send to people on my same domain, but can not sent to anyone else like yahoo, hotmail, or other domains. Any help???

eeandf · 11-30-2007, 05:28 PM

I have a similar problem. I can reply to all other mail except from my domain.
Here is how I set up the iPhone:
mail--->other---IMAP. I did not choose exchange. I was following a document I found somewhere on the net.
Could this be my problem?

Secondly per iPhone tech support:
Inbound I use owa address: webmail.exchange.com
username and password
Outbound mail: att smtp

with this setup am able to receive but not able to reply to mydomain but can respond to all other domains.

Seattle10 · 11-30-2007, 06:53 PM

Are you sure that is what you have in your outgoing host "smtp att"? Mine is setup the exact same way as yours except for the outgoing host I used the same as incoming with no username or password. Are you using port 25 or 587 for outgoing?

eeandf · 12-04-2007, 05:17 AM

iPhone tech wanted me to put att smtp for the outgoing. I will try and test using the inbound and outbound the same. Thanks

07-10-2007, 11:31 AM	#12
iAm ----> Join Date: Apr 2007 Location: UK Posts: 377	If anyone is still struggling with this iceweb have added iphone support for their MS Exchange subscription service. It costs $8.50 put might be of use to some http://www.icemail.com/ __________________ New to the iPhone? Beginners Guide To The Apple iPhone 101 Most Commonly Asked iPhone Questions

11-12-2007, 07:34 PM	#15
iAm ----> Join Date: Apr 2007 Location: UK Posts: 377	Here's a really great walkthrough guide that will help you out: http://blog.monkeykit.com/2007/08/31...h-your-iphone/ It goes into a lot of detail so hopefully that'll fix it for you. __________________ New to the iPhone? Beginners Guide To The Apple iPhone 101 Most Commonly Asked iPhone Questions

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-10-2007, 12:48 AM	#11
jdej663390 Junior Member Join Date: Jul 2007 Posts: 18	That sounds like one of the services got stopped or disconnected. Make sure your RPC over HTTP services are running. Also restart exchange (not the server just the exchange services) restart IIS Go to your system Manager and check the first group store and make sure that all the protocols are running except the nntp one. I think this will resolve your problem.

09-21-2007, 02:40 AM	#13
cporto Junior Member Join Date: Sep 2007 Posts: 1	Hello Fellas: I have some success utilizing the Exchange feature, but it is limited to within the private network (Office WiFi and works great). At my home (another WiFi, but different private subnet) I cannot get updates, which leads me to believe that the port, although supposedly opened at my office Netgear FVS124G, is being blocked. Do you guys have any other suggestions? I haven't had the opportunity to test a third WiFi, and the one I am at now is a companion Netgear (FVS114) with a VPN tunnel running. Can the Exchange server talk to a different private IP? I thought it shouldn't matter with a Secure Cert. and a successful connection. (Although a secure cert. shouldn't be necessary) Thank you. cporto

11-12-2007, 07:12 PM	#14
Seattle10 Junior Member Join Date: Nov 2007 Posts: 4	Still having trouble getting the iphone setup correctly with exchange. We are running exchange 2003 and OWA. I got IMAP and owa enabled, and RPC over http enable but have no luck. I always get the "Cannot Connect Using SSL",Do you want to try setting up the account without SSL" Should I be setting this up using SSL and if so, what changes do i need to make? If I click "YES" it tries to verify but always get " username or password in incorrect. Any help would be much appreciated. Thanks.

11-29-2007, 04:09 PM	#16
Seattle10 Junior Member Join Date: Nov 2007 Posts: 4	I finally got my email setup on iphone through exchange server and am receive and view emails but am having trouble sending emails. I can send to people on my same domain, but can not sent to anyone else like yahoo, hotmail, or other domains. Any help???

11-30-2007, 05:28 PM	#17
eeandf Junior Member Join Date: Nov 2007 Posts: 3	I have a similar problem. I can reply to all other mail except from my domain. Here is how I set up the iPhone: mail--->other---IMAP. I did not choose exchange. I was following a document I found somewhere on the net. Could this be my problem? Secondly per iPhone tech support: Inbound I use owa address: webmail.exchange.com username and password Outbound mail: att smtp with this setup am able to receive but not able to reply to mydomain but can respond to all other domains.

11-30-2007, 06:53 PM	#18
Seattle10 Junior Member Join Date: Nov 2007 Posts: 4	Are you sure that is what you have in your outgoing host "smtp att"? Mine is setup the exact same way as yours except for the outgoing host I used the same as incoming with no username or password. Are you using port 25 or 587 for outgoing?

12-04-2007, 05:17 AM	#19
eeandf Junior Member Join Date: Nov 2007 Posts: 3	iPhone tech wanted me to put att smtp for the outgoing. I will try and test using the inbound and outbound the same. Thanks

Talk iPhone - iPhone Forum

Welcome to the iPhone Forums, Here you'll find the latest iPhone news, articles and discussion for the Apple iPhone. With discussion forums and helpcovering iphone unlocking, jailbreaking and all types of iPhone applications.